| General specifications |
| Signal type | Analog input/analog output |
| Functional safety related parameters |
| Safety Integrity Level (SIL) | SIL 2 |
| Systematic capability (SC) | SC 3 |
| Supply |
| Rated voltage | 5 ... 35 V DC , loop powered |
| Control circuit |
| Connection | terminals 12-, 11+ |
| Voltage | 5 ... 35 V DC |
| Current | 4 ... 20 mA |
| Power dissipation | at 20 mA and Uin < 24.3 V: < 250 mW per channel
at 20 mA and Uin > 24.3 V: < 500 mW per channel |
| Field circuit |
| Connection | terminals 1+, 2- |
| Voltage | for 5V < Uin < 24.3V: ≥ 0.9 x Uin - (0.37 x current in mA) - 1.0
for Uin > 24.3 V: ≥ 21 V - (0.36 x current in mA) |
| Short-circuit current | at Uin > 24.3 V : ≤ 65 mA |
| Transfer current | ≤ 40 mA |
| Transfer characteristics |
| Accuracy | 0.1 % |
| Deviation | |
| | After calibration | ≤ ± 20 µA; incl. calibration, linearity, hysteresis and load fluctuations at the field side up to a load of 1 kΩ at 20 °C (68 °F) |
| | Influence of ambient temperature | ≤ ± 2 µA/K at Uin ≤ 20 V; ≤ ± 5 µA/K at Uin > 20 V |
| Rise time | ≤ 5 ms at bounce from 4 ... 20 mA and Uin < 24 V |
| Galvanic isolation |
| Field circuit/control circuit | safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V |
| Indicators/settings |
| Labeling | space for labeling at the front |
| Directive conformity |
| Electromagnetic compatibility | |
| | Directive 2014/30/EU | EN 61326-1:2013 (industrial locations) |
| Conformity |
| Electromagnetic compatibility | NE 21:2012
EN 61326-3-2:2008 |
| Degree of protection | IEC 60529:2001 |
| Protection against electrical shock | UL 61010-1:2012 |
| Ambient conditions |
| Ambient temperature | -20 ... 70 °C (-4 ... 158 °F) |
| Mechanical specifications |
| Degree of protection | IP20 |
| Connection | screw terminals |
| Mass | approx. 100 g |
| Dimensions | 20 x 107 x 115 mm (0.8 x 4.2 x 4.5 inch) (W x H x D) , housing type B1 |
| | Height | 107 mm |
| | Width | 20 mm |
| | Depth | 115 mm |
| Mounting | on 35 mm DIN mounting rail acc. to EN 60715:2001 |
| Data for application in connection with hazardous areas |
| EU-type examination certificate | BAS 98 ATEX 7343 X |
| | Marking |  II (1)G [Ex ia Ga] IIC
II (1)D [Ex ia Da] IIIC
I (M1) [Ex ia Ma] I
|
| | Voltage | 25.2 V |
| | Current | 93 mA |
| | Power | 585 mW |
| Control circuit | |
| | Maximum safe voltage | 250 V eff (Attention! The rated voltage can be lower.) |
| Field circuit | |
| | Maximum safe voltage | 250 V eff (Attention! The rated voltage can be lower.) |
| Certificate | FIDI 22 ATEX 0001 X |
| | Marking | II 3G Ex ec IIC T4 Gc |
| Galvanic isolation | |
| | Field circuit/control circuit | safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V |
| Directive conformity | |
| | Directive 2014/34/EU | EN IEC 60079-0:2018 , EN 60079-11:2012 , EN IEC 60079-7:2015+A1:2018 |
| International approvals |
| FM approval | |
| | Control drawing | 116-0437 |
| UL approval | E106378 |
| | Control drawing | 116-0438 (cULus) |
| IECEx approval | |
| | IECEx certificate | IECEx BAS 05.0004X
IECEx CML 19.0040X |
| | IECEx marking | [Ex ia Ga] IIC , [Ex ia Da] IIIC , [Ex ia Ma] I
Ex ec IIC T4 Gc |
